For Windows, you can identify the IP address of the server as follows.

Through the Control Panel:

Go to Control Panel - Network. Click TCP/IP Protocol and find TCP/IP Properties. In the IP Address tab, either Specify an IP address or Obtain IP address from a DHCP server is marked. To use Share360, you must select Specify an IP address. The value in Specify an IP address is the server IP address.

Through the Command Prompt:

On the server, go to Start > Program > Command Prompt.

If you enter C:\>ipconfig /all,

Windows NT/2000

For example:Windows NT IP Configuration

Host Name • • • • • :share360.com
DNS Servers • • • • • • • :10.0.0.9
Node Type • • • • • • • • :Broadcast
NetBIOS Scope ID • • • • • :
IP Routing Enabled • • • • :No
WINS Proxy Enabled • • • • :No
NetBIOS Resolution Uses DNS:No

Ethernet adapter DC21X41:

Description • •:DEC DC21140 PCI Fast Ethernet Adapter
Physical Address • :00-00-F8-06-AD-54
DHCP Enabled • • • • • :No
IP Address. • • • • • :10.0.0.9
Subnet Mask. • • • • • :255.255.255.0
Default Gateway • • • • • :10.0.0.1

Check the servers host name or IP address here. (If IP address is not set up yet, ask your network administrator.) If the DHCP server is used (DHCP Enabled: Yes), you cannot use Share360. Use a static IP address. For more details, ask your network administrator.

• If this answer did not help you, send an email to the Contact Center.